semiatic

Battery / charging warning light

A problem with the electrical charging system: while the engine runs, the battery is not being charged as it should be. UN R121 calls it “Electrical charging condition” and makes it red; FMVSS 101 calls it “Electrical charge”. It does not by itself mean the battery is faulty.

Red

What to do

Switch off electrical loads you do not need (heated screen and seats, fan, entertainment) and head for help — if the charging system has failed, the car is living on what is left in the battery, and when that runs out the engine and electrics can stop. Check the manual for what else this lamp reports on your car.

Makes differ: what this light means on your car, the other colours it may use for the symbol and what the car wants you to do are set by the manufacturer, so your car's owner's manual is the authority.

Symbol
Battery with − and + terminals
Colour
Red

What the colour means

Red — “danger”

The colour code that UN R121 points to (ISO 2575, paragraph 5) is sold, not published. The EU wrote it into law for two- and three-wheel vehicles in Directive 2009/80/EC, Annex I, 2.1.4: “red: danger”. FMVSS 101 does not define colour meanings, but S5.5.6(b) says a telltale for which red is required must not be cancelable while its underlying condition exists, and note 4 to Table 1 allows red to be red-orange.

Where the regulations list it

RuleRowColour it sets
FMVSS 101Table 1, “Electrical charge” — telltale and indicatorno colour required
UN R121Table, item 12 “Electrical charging condition” — tell-talered

FMVSS 101: Passenger cars, multipurpose passenger vehicles, trucks and buses sold in the US (S3). Table 1 gives the symbol or words and, where one is required, the colour of each telltale; Table 2 lists identifiers with no colour requirement. UN R121: Cars (category M) and light goods vehicles (N1) type-approved under the UN 1958 Agreement, which includes the EU, UK and Japan (para 1). Its table gives the symbol and colour of each tell-tale; note 2 says the symbols are substantially identical to those of ISO 2575:2004.

Good to know

  • FMVSS 101 accepts the words “Volts”, “Charge” or “Amp” as the identifier.

Other red lights

Sources

Meanings are written in our own words from these public texts, not quoted from ISO 2575, and were checked on the date shown.