Hive thermostat: Receiver single amber flash
The receiver has found the hub and is now ready to pair with the thermostat.
Applies to: Hive single- and dual-channel receivers. What you see: a light.
What Hive says to do
- This is when to reset the thermostat so it pairs. Hive 2 Thermostat: hold the Back Arrow and Menu buttons together until the ‘Factory Reset’ countdown ends; it shows ‘Searching’.
- Hive Thermostat Mini: hold the down arrow and ‘O’ buttons until the Hive symbol appears. Hive 1: hold ‘+’ and ‘−’ while putting the battery back until ‘FIND’ appears.
- When pairing is complete, check the receiver’s status light has turned green.
Source
Hive’s own help page, read on the date shown.
- Hive Support: Step-by-Step Guide to Reconnecting Your Hive Heating Devices — Hive single- and dual-channel receivers with the Hive 2 Thermostat, Hive Thermostat Mini and Hive 1 thermostat. support.hivehome.com Checked 2026-09-29.