semiatic

LG washing machine symbols and display codes

10 symbols that LG shows in its own manual or support pages, each in our own drawing, with the maker’s own name for it next to ours. Tap a symbol for what it does, where makes differ and every source. Further down: every icon and display code in 2 LG owner’s manuals read cover to cover, each with model, edition and page.

Most-asked on an LG display

  • UEUnbalance error. LG: “The load is too small. Add additional items to allow the washer to balance the load.”
  • OEWater outlet error. LG: “Drain hose is kinked, pinched, or clogged.”
  • IEInlet error. LG: “Water supply faucets are not fully open. Make sure that the water faucets are fully open.”
  • dEDoor open error. LG: “The door is not secured. Close and secure the door. If the message keeps appearing, unplug the power cord and call for service.”
  • tcLTub clean alarm. LG: “It is time to run the Tub Clean cycle. This is not an error code.”
  • CLControl lock function. LG: “The Control Lock function is on to prevent anyone from changing cycles or operating the washer.”

Each line is quoted from the troubleshooting table of LG’s WM3600H*A manual (MFL70701250 Rev.04, 2026). Tap a code for both manuals’ wording, or see all 15 codes and LG’s help-library fixes for each fault.

Check your manual — models differ. Two LG machines can carry different sets of symbols, and the same drawing can mean different things on different brands; only your model’s manual says exactly what a programme or light does on your machine.

Read this first

LG’s two front-loader manuals checked here, the US and Canadian WM3600H*A (January 2026) and the UK F4V910 / F4V909 (March 2019), draw only a few icons: the stages of the cycle, the door lock, Wi-Fi and a handful of options. Most of what an LG display tells you comes as a two- or three-letter code in its seven-segment font, so the codes are listed below with the icons. Three things the manuals show: the same letters can mean different faults in different regions (PF is a water level sensor error in the US manual, a power failure in the UK one); CL and tcL are not faults at all; and LG says the remaining time “is only an estimate”. The cycle status lights drawn as a T-shirt, the WashTower dryer lights and the remote start light come from LG Canada’s support page.

Every symbol and code in LG’s own manuals

Read whole, cover to cover: LG Owner’s Manual — WM3600H*A front-load washing machine (MFL70701250 Rev.04, 23 Jan 2026, PDF), for the WM3600H*A (US and Canada, English); and LG Owner’s Manual — F4V910 / F4V909 front-load washing machine (MFL69478486 Rev.03, 21 Mar 2019, PDF), for the F4V910*TS / F4V909*TS (also F4WV910P, F4WV909P, FV90JNS2Q, FV90VNS2Q) (UK and Europe, English). Below is every icon in their control-panel and display tables and every code in their displays and troubleshooting tables, in LG’s own words. The icons in these manuals are printed in LG’s icon font, so this page names them rather than copying them; where this site has its own drawing, the row links it.

The 13 icons

  • Cycle status lights

    • WM3600H*A manual (MFL70701250 Rev.04, 2026-01-23), p. 25: “These LEDs will blink when a cycle is selected to indicate which stages will run. When a cycle is running, the LED for the active stage will blink, and the LEDs for the remaining stages will remain steady. Once a stage is complete, the LED will turn off.”

    Not in the F4V910 / F4V909 manual.

  • Wash (cycle stage)

    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 21: “When the laundry is being washed, this icon is illuminated.”

    Not in the WM3600H*A manual.

  • Rinse (cycle stage) our drawing and page

    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 21: “When the laundry is being rinsed after completion of washing programme, this icon is illuminated.”

    Not in the WM3600H*A manual.

  • Spin (cycle stage) our drawing and page

    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 21: “When the laundry is spun to remove the water in the laundry, this icon is illuminated.”

    Not in the WM3600H*A manual.

  • Door lock our drawing and page

    • WM3600H*A manual (MFL70701250 Rev.04, 2026-01-23), p. 25: “This indicator lights up when the cycle starts and the door is locked. The indicator light stays on until the cycle is paused, stopped or has finished.”
    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 21: “When this icon is illuminated, the door cannot be opened.”
  • Remaining time (shows --- while the load is weighed)

    • WM3600H*A manual (MFL70701250 Rev.04, 2026-01-23), p. 25: “If the display shows ---, then the time will be displayed after the load sensing has detected the load size. The time shown is only an estimate.”
    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 21: “When a programme is selected, the default time for that programme is displayed. The default time can be changed according to the selected option.”
  • AI DD (US) or Intello DD (UK) indicator

    • WM3600H*A manual (MFL70701250 Rev.04, 2026-01-23), p. 25: “AI DD provides the appropriate drum rotation actions after load sensing is completed.”
    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 21: “Intello DD provides the desired washing and spinning.”
  • Wi-Fi our drawing and page

    • WM3600H*A manual (MFL70701250 Rev.04, 2026-01-23), p. 25: “This indicator is lit when the product is connected to a home Wi-Fi network.”
    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 20: “This icon is illuminated when the appliance is connected to WLAN network.”
  • Remote Start our drawing and page

    • WM3600H*A manual (MFL70701250 Rev.04, 2026-01-23), p. 25: “This indicator lights up when the Remote Start feature is activated.”

    Not in the F4V910 / F4V909 manual.

  • Cold Wash

    • WM3600H*A manual (MFL70701250 Rev.04, 2026-01-23), p. 25: “This indicator lights up when the Cold Wash feature is activated.”

    Not in the F4V910 / F4V909 manual.

  • Wrinkle Care (steam after the spin)

    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 20: “When the laundry is spun after steaming, this icon is illuminated.”

    Not in the WM3600H*A manual.

  • Rinse+ our drawing and page

    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 20: “When the number of rinse is added, this icon is illuminated.”

    Not in the WM3600H*A manual.

  • Intensive our drawing and page

    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 20: “When the heavily soiled laundry is washed intensively, this icon is illuminated.”

    Not in the WM3600H*A manual.

The 15 display codes

Written as the manuals print them, upper and lower case included; the panel shows them in a seven-segment font, so a few letters look different there (noted on the code).

  • UE

    • WM3600H*A manual (MFL70701250 Rev.04, 2026-01-23), p. 43, troubleshooting: UNBALANCE ERROR — “The load is too small. Add additional items to allow the washer to balance the load.”
    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 37, troubleshooting: UNBALANCE ERROR — “Add 1 or 2 similar items or smaller articles of laundry to help balance the load.”
  • OE

    • WM3600H*A manual (MFL70701250 Rev.04, 2026-01-23), p. 43, troubleshooting: WATER OUTLET ERROR — “Drain hose is kinked, pinched, or clogged.”
    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 37, troubleshooting: WATER OUTLET ERROR — “The drain filter is clogged. Check and clean the drain filter.”
  • IE

    The UK manual prints it 1E; in the display’s segment font a 1 and an I are the same single bar.

    • WM3600H*A manual (MFL70701250 Rev.04, 2026-01-23), p. 42, troubleshooting: INLET ERROR — “Water supply faucets are not fully open. Make sure that the water faucets are fully open.”
    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 37, troubleshooting: INLET ERROR — “Water supply is not adequate in that location. Water does not enter appliance or it enters slowly.”
  • dEdE1dE2dE4

    • WM3600H*A manual (MFL70701250 Rev.04, 2026-01-23), p. 43, troubleshooting: DOOR OPEN ERROR — “The door is not secured. Close and secure the door. If the message keeps appearing, unplug the power cord and call for service.”
    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 38, troubleshooting: DOOR ERROR — “Door sensor malfunctions.”
  • tcL

    Often typed tCL; both manuals print it tcL, with a small c.

    • WM3600H*A manual (MFL70701250 Rev.04, 2026-01-23), p. 43, troubleshooting: TUB CLEAN ALARM — “It is time to run the Tub Clean cycle. This is not an error code.”
    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 35: Tub Clean — “Turn on the power, and then select the Tub Clean. tcL will be displayed on the display.”
  • CL

    • WM3600H*A manual (MFL70701250 Rev.04, 2026-01-23), p. 43, troubleshooting: CONTROL LOCK FUNCTION — “The Control Lock function is on to prevent anyone from changing cycles or operating the washer.”
    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 29: Child Lock — “A beeper will sound, and CL will appear on the display. When the Child Lock is set, all buttons are locked except the Power button.”
  • LE

    • WM3600H*A manual (MFL70701250 Rev.04, 2026-01-23), p. 43, troubleshooting: MOTOR LOCKED ERROR — “A motor error has occurred. Allow the washer to stand for 30 minutes and then restart the cycle.”
    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 38, troubleshooting: MOTOR LOCKED ERROR — “Let the appliance wait for 30 minutes until the motor is cooled down and then, restart the cycle”
  • tE

    • WM3600H*A manual (MFL70701250 Rev.04, 2026-01-23), p. 43, troubleshooting: TEMPERATURE SENSOR ERROR — “Control error. Unplug the washer and wait 60 minutes. Reconnect power and try again.”
    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 38, troubleshooting: MOTOR LOCKED ERROR (listed with LE) — “This is a control error. Unplug the power plug and call for service.”
  • FE

    • WM3600H*A manual (MFL70701250 Rev.04, 2026-01-23), p. 43, troubleshooting: OVERFLOW ERROR — “Water level is too high due to a faulty water valve. Close the water faucets, unplug the washer, and call for service.”
    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 38, troubleshooting: OVERFLOW ERROR — “Water overfills due to the faulty water valve.”
  • PE

    • WM3600H*A manual (MFL70701250 Rev.04, 2026-01-23), p. 43, troubleshooting: PRESSURE SENSOR ERROR — “The water level sensor is not working correctly. Close the water faucets, unplug the washer, and call for service.”
    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 38, troubleshooting: PRESSURE SENSOR ERROR — “Water level sensor malfunctions.”
  • PF

    • WM3600H*A manual (MFL70701250 Rev.04, 2026-01-23), p. 43, troubleshooting: WATER LEVEL SENSOR ERROR — “Water level is too low or high compared to the load. Unplug the washer and wait for 60 minutes. Reconnect power and try again.”
    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 38, troubleshooting: POWER FAILURE — “The appliance experienced a power failure. Restart the cycle.”
  • FF

    • WM3600H*A manual (MFL70701250 Rev.04, 2026-01-23), p. 43, troubleshooting: FROZEN ERROR — “Inlet hose, drain hose or drain pump is frozen.”
    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 38, troubleshooting: FROZEN FAILURE — “Is supply/drain hose or drain pump frozen?”
  • vS

    Printed vs; the display’s font draws the v like a small u.

    • WM3600H*A manual (MFL70701250 Rev.04, 2026-01-23), p. 44, troubleshooting: VIBRATION SENSOR ERROR — “Vibration sensor malfunctions. Call for service.”
    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 38, troubleshooting: VIBRATION SENSOR ERROR — “Vibration sensor malfunctions.”
  • Sud

    • WM3600H*A manual (MFL70701250 Rev.04, 2026-01-23), p. 43, troubleshooting: OVERSUDSING DETECTION — “To remove suds, turn the washer off then back on, then run the Rinse+Spin cycle.”

    Not in the F4V910 / F4V909 manual.

  • AE

    • F4V910 / F4V909 manual (MFL69478486 Rev.03, 2019-03-21), p. 38, troubleshooting: WATER LEAKAGE — “Water leaks. Call for service.”

    Not in the WM3600H*A manual.

The 10 symbols

Rinse

Maker’s name: Rinsing

Shown in:

Extra rinse

Maker’s name: Rinse+

Shown in:

Spin

Maker’s name: Spinning

Shown in:

Intensive

Maker’s name: Intensive

Shown in:

Door locked

Maker’s name: Door lock indicator

Shown in:

Clean the filter (fluff, lint)

Maker’s name: Lint filter status indicator

Shown in:

Check the heat exchanger (condenser)

Maker’s name: Condenser clean indicator

Shown in:

Cooling phase (dryer)

Maker’s name: Cool down

Shown in:

Wi-Fi (connected to the app)

Maker’s name: Wi-Fi indicator

Shown in:

Remote start

Maker’s name: Remote start indicator

Shown in:

LG symbols with no page here

LG’s own page shows these too, but no second maker’s source confirms them yet, so this site has no drawing or page for them. The meaning is the maker’s own wording, quoted:

Not listed for LG

The LG sources checked here do not show these symbols from this site, so they are left off this page: Cottons, Eco 40-60, Synthetics, Mixed, Wool, Delicates and silk, Quick wash, Cold wash, Prewash, Soak, Drain, Iron: easy iron, Steam and steam refresh, Drum clean, Child lock, Add garment, Delay start, Hourglass, Timed dry, Cupboard dry, Anti-crease, Empty the water tank, Main wash, Fabric softener. That does not mean no LG machine has them — only that no LG manual or support page cited here shows the symbol. If your machine shows one, see all washing-machine symbols by shape.

Other brands

Sources

A symbol is listed here only when one of these LG pages shows it. Each was fetched and read on the date shown; the brand names and quotations are the maker’s wording, everything else is ours.

Made with AI tools. · Privacy