semiatic

Setting confirmed · Nespresso Citiz, Inissia and Pixie

Nespresso Citiz, Inissia and Pixie: Lights blink fast 3 times after holding Lungo for 5 seconds (machine off)

The machine has been reset to its factory settings: Espresso 40 ml, Lungo 110 ml, Auto Off after 9 minutes.

Which light
Cup, drink or strength buttons
Colour
Colour not named by the maker
Steady or flashing
Flashing or blinking

What Nespresso says to do

  1. Nothing to fix. The lights then blink normally while the machine heats and turn steady when it is ready.
  2. Program your cup sizes again if you had changed them.

From CitiZ — My Machine (user manual): Energy saving mode, First use, Coffee preparation, Emptying the system, Reset to factory settings, Descaling and Troubleshooting and Inissia (user manual): Energy saving mode, Coffee preparation, Emptying the system, Reset to factory settings, Descaling and Troubleshooting and Pixie — My Machine (user manual): First use, Coffee preparation, Energy saving mode, Emptying the system, Reset to factory settings, Descaling and Troubleshooting. This is the Citiz, Inissia and Pixie’s pattern; another Nespresso machine may use the same light for something else — check the manual for your model.

Other Nespresso Citiz, Inissia and Pixie lights

Setting confirmed on other machines

The same need shows up as a different light on each machine — which is why a light cannot be read without the machine.

Sources

Every line on this page comes from Nespresso’s own documents, read on the date shown. Nothing is taken from third-party manual sites.