semiatic

Normal operation · X-Sense · smoke

X-Sense: One red flash every 60 seconds, no sound

Normal: the red LED flashes once every 60 seconds.

What you see
One red flash about every 60 seconds
What you hear
Silent

If it is sounding a full alarm instead: the maker’s emergency instruction

Smoke alarm

X-Sense: never ignore any alarm (XS01-WR manual). Check for signs of smoke or fire; if you see or smell smoke, evacuate immediately and call emergency services. If you are unsure what the hazard is, contact emergency services for guidance.

From Wireless Interlinked Smoke Alarm XS01-WR — User Manual and Smoke Detector Beeps and Sounds Decoded.

The X-Sense alarm on these pages senses smoke only. For a carbon monoxide alarm, follow its own maker’s instruction.

What X-Sense says to do about this signal

  1. Nothing to do. X-Sense says to test the alarm once a week and clean it at least every 3 months.

From Wireless Interlinked Smoke Alarm XS01-WR — User Manual. If your alarm’s pattern is not exactly this, check the manual for your model: X-Sense models do not all use the same signals.

Other X-Sense signals

Normal operation on other brands

The same state sounds and looks different on each make — which is why a chirp pattern cannot be read without the brand.

Sources

Every line on this page comes from X-Sense’s own documents, read on the date shown. Nothing is taken from third-party code sites or other makes.