LiftMaster garage door opener: Code 4-2: 4 UP flashes, 2 DOWN flashes
Resistance while opening: the door stops before it is fully open.
Applies to: LiftMaster and Chamberlain Security+ 2.0 and Security+ 3.0 openers with UP and DOWN arrows; codes 3-5 and 5-5 only on the wall-mounted jackshaft models 8500W/RJO70, 98022/RJO101 and 98032. What you see: the UP and DOWN arrows, 4 UP flashes, then 2 DOWN flashes.
Covers Chamberlain openers too: the two brands share one published table, so each code has one page here.
What LiftMaster says to do
- LiftMaster says to close the door with the wall control, inspect the path and tracks, remove anything in the way and try the door again.
- If it still does not open fully, LiftMaster says to check the balance of the door.
LiftMaster’s safety line: “Never adjust or loosen the door’s springs, cables, pulleys, or brackets yourself, they’re under extreme tension.” Where a spring, cable or balance problem shows up, its page says to stop and contact a local garage door professional.
No repair advice of our own. The steps above are only LiftMaster’s, as its page states them; semiatic gives no repair instructions of its own. For anything beyond them, LiftMaster’s page and a trained door technician are the authority.
Source
LiftMaster’s own help page, read on the date shown.
- Chamberlain Group Support (LiftMaster and Chamberlain): Garage Door Opener | Diagnostic Codes and UP/DOWN Flashing Lights — LiftMaster and Chamberlain Security+ 2.0 and Security+ 3.0 openers with UP and DOWN arrows; codes 3-5 and 5-5 only on the wall-mounted jackshaft models 8500W/RJO70, 98022/RJO101 and 98032. support.chamberlaingroup.com Checked 2026-09-29.
Other LiftMaster codes
Find a code by which light flashes and how many times, on any maker’s opener →