semiatic

Viessmann error codes

38 codes that Viessmann and Viessmann UK publish for a boiler and a heat pump, each quoted from the maker’s own manual or support page and explained on its appliance’s page. Pick the appliance, or type the code from the display: only Viessmann codes are searched here.

Every Viessmann appliance we cover

ApplianceCodesSource
Viessmann boiler21 codesViessmann, 3 documents
Viessmann heat pump17 codesViessmann UK, 1 document

Viessmann boiler error codes

21 codes from Viessmann. 21 of them are marked for a Gas Safe registered engineer; for the rest the page gives the checks the maker lets an owner do. Tap a code for its meaning:

Viessmann heat pump error codes

17 codes from Viessmann UK. 17 of them are marked for an installer; for the rest the page gives the checks the maker lets an owner do. Tap a code for its meaning:

Gas boiler: do only the checks its user manual gives you — read the pressure gauge, top up through the filling loop, press the reset button, thaw a frozen condensate pipe at ground level. Keep the casing on and leave sealed parts alone. Anything else is for a Gas Safe registered engineer. If you smell gas, call the National Gas Emergency Service on 0800 111 999. Heat pump: do only the checks the maker gives the owner for that code — read the water pressure on the controller, keep the outdoor unit clear of leaves and snow, switch the power off and on where the maker says to. Keep the casing on: refrigerant, wiring and the water circuit’s parts are not owner work. Anything else is for the heat-pump installer or the maker’s service engineer: in the UK and EU only an F-gas certified technician may open the refrigerant circuit. Two Viessmann models can use different codes: your model’s manual is the authority.

Sources

Every Viessmann code on this site comes from these pages, published by Viessmann and Viessmann UK and read on the date shown.

Made with AI tools. · Privacy