Ideal error codes
18 codes that Ideal Heating publishes for a boiler, each quoted from the maker’s own manual or support page and explained on its appliance’s page. Pick the appliance, or type the code from the display: only Ideal codes are searched here.
Every Ideal appliance we cover
| Appliance | Codes | Source |
|---|---|---|
| Ideal boiler | 18 codes | Ideal Heating, 2 documents |
Ideal boiler error codes
18 codes from Ideal Heating. 5 of them are marked for a Gas Safe registered engineer; for the rest the page gives the checks the maker lets an owner do. Tap a code for its meaning:
Ideal appliances left out, and why
- Ideal heat pump: Ideal’s Logic Air user guide (Rev C, on idealheating.com) explains four controller errors — 60, 65, 127 and 370 — and the Logic Air 8–10 maintenance manual (2451, 2023) lists faults only as LED flash counts on the circuit boards inside the indoor and outdoor units, for the engineer. Fewer than 5 owner codes could be confirmed, so no page (checked 2026-10-14).
Gas boiler: do only the checks its user manual gives you — read the pressure gauge, top up through the filling loop, press the reset button, thaw a frozen condensate pipe at ground level. Keep the casing on and leave sealed parts alone. Anything else is for a Gas Safe registered engineer. If you smell gas, call the National Gas Emergency Service on 0800 111 999. Two Ideal models can use different codes: your model’s manual is the authority.
Sources
Every Ideal code on this site comes from these pages, published by Ideal Heating and read on the date shown.
- Ideal Heating (boiler): Logic Combi2 user guide (10.2023, UIN 237664 A01): 1.9 fault codes Checked 2026-09-28.
- Ideal Heating (boiler): Ideal Heating FAQs: what does my fault code mean? Checked 2026-09-28.