semiatic

Blink doorbell lights: what each colour and blink means

Blink doorbells use a light on the button and, on newer models, a separate small status light. Red on the button is about setup (blinking: ready to set up; solid: setup failed), blue is recording or live view, and a press shows as blinking white (blinking blue on the 1st gen). Once setup has worked, no light at all is normal.

The button light is the ring around the doorbell button. The Wired Doorbell 2K+, Video Doorbell (2nd Gen) and Battery Doorbell 2K+ also have a small status light; the Video Doorbell (1st Gen) uses the button light for everything.

The Sync Module hub that goes with it has lights of its own: Blink Sync Module lights.

Button light blinking red

Blink doorbell, the light ring or button: red, flashing or blinking
Our drawing: the light ring or button, red, flashing or blinking.

The doorbell is in pairing mode and ready to be set up.

Applies to: Video Doorbell (2nd Gen), Battery Doorbell 2K+ and Video Doorbell (1st Gen). What you see: red, flashing or blinking, on the light ring or button.

What Blink says to do

  1. If the red light does not flash when it should, Blink says to take the batteries out for five seconds and put them back in.

Source:

  • Blink Support: Understanding the LEDs on your Video Doorbell — Wired Doorbell 2K+, Video Doorbell (2nd Gen), Battery Doorbell 2K+ and Video Doorbell (1st Gen), a chart per model. support.blinkforhome.com Checked 2026-09-29.

Button light solid red

Blink doorbell, the light ring or button: red, solid (steady)
Our drawing: the light ring or button, red, solid (steady).

Setup did not succeed.

Applies to: Every Blink video doorbell. What you see: red, solid (steady), on the light ring or button.

What Blink says to do

Wiring and power. Blink links this light, on at least some models, to the doorbell’s wiring or power. The steps here are only Blink’s own, as its page states them, including any advice to use a qualified or certified electrician; semiatic gives no wiring instructions of its own.

  1. Blink says to try setup again.
  2. Wired Doorbell 2K+: if it keeps happening, Blink says to check that your chime wiring is properly connected.
  3. Video Doorbell (2nd Gen), Battery Doorbell 2K+ and Video Doorbell (1st Gen): if it keeps happening, Blink suggests replacing the batteries.

Source:

  • Blink Support: Understanding the LEDs on your Video Doorbell — Wired Doorbell 2K+, Video Doorbell (2nd Gen), Battery Doorbell 2K+ and Video Doorbell (1st Gen), a chart per model. support.blinkforhome.com Checked 2026-09-29.

Button light blinking green

Blink doorbell, the light ring or button: green, flashing or blinking
Our drawing: the light ring or button, green, flashing or blinking.

The doorbell is powering up.

Applies to: Wired Doorbell 2K+. What you see: green, flashing or blinking, on the light ring or button.

What to do

Blink Support gives no step for this light on the page cited; the meaning above is all it says.

Source:

  • Blink Support: Understanding the LEDs on your Video Doorbell — Wired Doorbell 2K+, Video Doorbell (2nd Gen), Battery Doorbell 2K+ and Video Doorbell (1st Gen), a chart per model. support.blinkforhome.com Checked 2026-09-29.

Solid green button with the status light blinking blue

Blink doorbell, the light ring or button or the small status light: green and blue, solid (steady), flashing or blinking
Our drawing: the light ring or button or the small status light, green and blue, solid (steady), flashing or blinking.

The doorbell is in pairing mode and ready to be discovered during setup.

Applies to: Wired Doorbell 2K+. What you see: green and blue, solid (steady), flashing or blinking, on the light ring or button or the small status light.

What to do

Blink Support gives no step for this light on the page cited; the meaning above is all it says.

Source:

  • Blink Support: Understanding the LEDs on your Video Doorbell — Wired Doorbell 2K+, Video Doorbell (2nd Gen), Battery Doorbell 2K+ and Video Doorbell (1st Gen), a chart per model. support.blinkforhome.com Checked 2026-09-29.

Solid blue light

Blink doorbell, the small status light or the light ring or button: blue, solid (steady)
Our drawing: the small status light or the light ring or button, blue, solid (steady).

The doorbell is recording motion or someone is watching its live view.

Applies to: Status light on the Wired Doorbell 2K+, Video Doorbell (2nd Gen) and Battery Doorbell 2K+; button light on the Video Doorbell (1st Gen). What you see: blue, solid (steady), on the small status light or the light ring or button.

What Blink says to do

  1. Blink says you can turn this light off in the app under Device Settings > General Settings > Button LED > Off when Recording.
  2. On doorbells connected to chime wiring you can instead set it to Always On; battery-powered doorbells such as the Battery Doorbell 2K+ do not have that option.

Source:

  • Blink Support: Understanding the LEDs on your Video Doorbell — Wired Doorbell 2K+, Video Doorbell (2nd Gen), Battery Doorbell 2K+ and Video Doorbell (1st Gen), a chart per model. support.blinkforhome.com Checked 2026-09-29.

Button light blinking white

Blink doorbell, the light ring or button: white, flashing or blinking
Our drawing: the light ring or button, white, flashing or blinking.

Someone pressed the doorbell.

Applies to: Wired Doorbell 2K+, Video Doorbell (2nd Gen) and Battery Doorbell 2K+. What you see: white, flashing or blinking, on the light ring or button.

What to do

Blink Support gives no step for this light on the page cited; the meaning above is all it says.

Source:

  • Blink Support: Understanding the LEDs on your Video Doorbell — Wired Doorbell 2K+, Video Doorbell (2nd Gen), Battery Doorbell 2K+ and Video Doorbell (1st Gen), a chart per model. support.blinkforhome.com Checked 2026-09-29.

Button light blinking blue

Blink doorbell, the light ring or button: blue, flashing or blinking
Our drawing: the light ring or button, blue, flashing or blinking.

Someone pressed the doorbell.

Applies to: Video Doorbell (1st Gen). What you see: blue, flashing or blinking, on the light ring or button.

What to do

Blink Support gives no step for this light on the page cited; the meaning above is all it says.

Source:

  • Blink Support: Understanding the LEDs on your Video Doorbell — Wired Doorbell 2K+, Video Doorbell (2nd Gen), Battery Doorbell 2K+ and Video Doorbell (1st Gen), a chart per model. support.blinkforhome.com Checked 2026-09-29.

No light

Blink doorbell, the light ring or button or the small status light: no light, off
Our drawing: the light ring or button or the small status light, no light, off.

Setup finished: the doorbell is online and connected to Wi-Fi. No light is the normal state.

Applies to: Every Blink video doorbell. What you see: no light, off, on the light ring or button or the small status light.

What to do

Blink Support gives no step for this light on the page cited; the meaning above is all it says.

Source:

  • Blink Support: Understanding the LEDs on your Video Doorbell — Wired Doorbell 2K+, Video Doorbell (2nd Gen), Battery Doorbell 2K+ and Video Doorbell (1st Gen), a chart per model. support.blinkforhome.com Checked 2026-09-29.

Sources

Blink’s own help pages only, read on the date shown. Nothing here comes from third-party “lights explained” sites or forums.

  • Blink Support: Understanding the LEDs on your Video Doorbell — Wired Doorbell 2K+, Video Doorbell (2nd Gen), Battery Doorbell 2K+ and Video Doorbell (1st Gen), a chart per model. support.blinkforhome.com Checked 2026-09-29.

Made with AI tools. · Privacy