semiatic

AT&T BGW320 All-Fi Hub lights: what each colour means

8 light states of the AT&T BGW320 All-Fi Hub, from AT&T’s own page Learn what your BGW320 Wi-Fi gateway lights mean. It has a status light and a WPS light.

  1. AT&T BGW320 All-Fi Hub, Status light: white, steady (solid)

    Status white (solid)

    The hub is online.

    AT&T’s page gives no step for this light.

    Source: Learn what your BGW320 Wi-Fi gateway lights mean (AT&T), checked 2026-09-29.

  2. AT&T BGW320 All-Fi Hub, Status light: red, steady (solid)

    Status red (solid)

    The hub is either overheating or has a hardware issue.

    What AT&T says to do

    1. Make sure it is on a flat surface with open space around it, then restart it.

    Source: Learn what your BGW320 Wi-Fi gateway lights mean (AT&T), checked 2026-09-29.

  3. AT&T BGW320 All-Fi Hub, Status light: red, flashing or blinking

    Status red (blinking slow)

    There’s an issue with your network.

    What AT&T says to do

    1. Check your cables.
    2. Then press and hold the reset button for ten seconds.
    3. If that doesn’t help, check for outages at att.com/outages.

    Source: Learn what your BGW320 Wi-Fi gateway lights mean (AT&T), checked 2026-09-29.

  4. AT&T BGW320 All-Fi Hub, Status light: yellow, flashing or blinking

    Status yellow (blinking fast)

    One of your voice lines has a problem.

    AT&T’s page gives no step for this light.

    Source: Learn what your BGW320 Wi-Fi gateway lights mean (AT&T), checked 2026-09-29.

  5. AT&T BGW320 All-Fi Hub, Status light: blue, steady (solid)

    Status blue (solid)

    The hub is in internet backup mode.

    AT&T’s page gives no step for this light.

    Source: Learn what your BGW320 Wi-Fi gateway lights mean (AT&T), checked 2026-09-29.

  6. AT&T BGW320 All-Fi Hub, WPS light: green, flashing or blinking

    WPS green (blinking slow)

    The hub is ready to pair with a device by WPS.

    AT&T’s page gives no step for this light.

    Source: Learn what your BGW320 Wi-Fi gateway lights mean (AT&T), checked 2026-09-29.

  7. AT&T BGW320 All-Fi Hub, WPS light: red, flashing or blinking

    WPS red (blinking fast)

    Too many devices are trying to pair, or the hub is restarting.

    AT&T’s page gives no step for this light.

    Source: Learn what your BGW320 Wi-Fi gateway lights mean (AT&T), checked 2026-09-29.

  8. AT&T BGW320 All-Fi Hub, WPS light: red, steady (solid)

    WPS red (solid)

    WPS pairing failed.

    What AT&T says to do

    1. Try again, or connect with your Wi-Fi name and password.

    Source: Learn what your BGW320 Wi-Fi gateway lights mean (AT&T), checked 2026-09-29.

Other AT&T hubs

The same colour can mean something else on another AT&T hub, so check the name on your hub’s label.

Sources

AT&T’s own pages only, read on the date shown. Nothing here comes from third-party router-light sites.

Made with AI tools. · Privacy