semiatic

Pod Point Solo 3S charger lights: what each colour and blink means

The Solo 3S has one LED status light on its front. Pod Point’s guide lists eight states. Blue is about Wi-Fi, not charging, and yellow has three possible meanings: a scheduled charge waiting to start, Auto Power Balancing holding the charge back, or the charger locked.

The light is the LED on the front of the charger. If you have a schedule set, Pod Point says the light is yellow when you first plug in and turns green when the set hours begin. Pod Point home chargers only support 2.4 GHz Wi-Fi.

Flashing white light

Pod Point Solo 3S, one status light: white, flashing or blinking
Our drawing: one status light, white, flashing or blinking.

The charger is powering on or updating its software.

Applies to: Solo 3S home charger. What you see: white, flashing or blinking.

What to do

Pod Point gives no step for the owner for this light on the page cited; the meaning above is what it says.

Source:

Solid blue light

Pod Point Solo 3S, one status light: blue, solid (steady)
Our drawing: one status light, blue, solid (steady).

The charger is in standby, is not connected to Wi-Fi, or is trying to reconnect.

Applies to: Solo 3S home charger. What you see: blue, solid (steady).

What Pod Point says to do

  1. Pod Point says: connect the charger to Wi-Fi from the At Home tab of the Pod Point App; you may need the charger’s connection QR code, which is on a sticker left after installation.

The maker puts this light down to Wi-Fi or the internet. If the problem is the router itself, its own lights are explained on the router and broadband hub lights page.

Source:

Blue light flashing pink

Pod Point Solo 3S, one status light: blue or pink, switching between colours
Our drawing: one status light, blue or pink, switching between colours.

The charger is connected to Wi-Fi and communicating with Pod Point.

Applies to: Solo 3S home charger. What you see: blue or pink, switching between colours.

What to do

Pod Point gives no step for the owner for this light on the page cited; the meaning above is what it says.

Source:

Solid green light

Pod Point Solo 3S, one status light: green, solid (steady)
Our drawing: one status light, green, solid (steady).

Your vehicle is charging.

Applies to: Solo 3S home charger. What you see: green, solid (steady).

What to do

Pod Point gives no step for the owner for this light on the page cited; the meaning above is what it says.

Source:

Flashing green light

Pod Point Solo 3S, one status light: green, flashing or blinking
Our drawing: one status light, green, flashing or blinking.

Your vehicle is fully charged, or your car’s own settings have paused charging.

Applies to: Solo 3S home charger. What you see: green, flashing or blinking.

What to do

Pod Point gives no step for the owner for this light on the page cited; the meaning above is what it says.

Source:

Solid yellow light

Pod Point Solo 3S, one status light: yellow, solid (steady)
Our drawing: one status light, yellow, solid (steady).

The vehicle is plugged in, a scheduled charge is set and the charger is waiting to start. Or the Auto Power Balancing system is active, or the charger has been locked.

Applies to: Solo 3S home charger. What you see: yellow, solid (steady).

What to do

Pod Point gives no step for the owner for this light on the page cited; the meaning above is what it says.

Source:

Red or flashing red light

Pod Point Solo 3S, one status light: red, solid (steady), flashing or blinking
Our drawing: one status light, red, solid (steady), flashing or blinking.

There is a fault with your charger.

Applies to: Solo 3S home charger. What you see: red, solid (steady), flashing or blinking.

What Pod Point says to do

Electrical safety. Pod Point ties this light to the power supply, earthing or an electrical fault, or its own steps use the circuit breaker, fuse box, RCD or isolator. The steps here are only Pod Point’s own, as its page states them; semiatic gives no electrical instructions of its own.

  1. Pod Point says: reset the charger by turning it off and on again at the fuse box before contacting support.

Source:

No light at all

Pod Point Solo 3S, one status light: no light, off
Our drawing: one status light, no light, off.

This can be a sign that there is no power to the charger.

Applies to: Solo 3S home charger. What you see: no light, off.

What Pod Point says to do

Electrical safety. Pod Point ties this light to the power supply, earthing or an electrical fault, or its own steps use the circuit breaker, fuse box, RCD or isolator. The steps here are only Pod Point’s own, as its page states them; semiatic gives no electrical instructions of its own.

  1. Pod Point says: trace the charger’s cable back to its breaker switch or fuse switch, usually in your consumer unit (fuse box), though it may be somewhere else.
  2. Pod Point says: to test the power, push the breaker switch down until you hear a click, then lift it back up; it should stay in position if it is working.
  3. Pod Point says: if this does not resolve it, there may be a fault with the breaker switch or the charger.

Source:

Sources

Pod Point’s own help pages or manual only, read on the date shown. Nothing here comes from third-party “lights explained” sites or forums.

Made with AI tools. · Privacy