Genie garage door opener: 600/700/800 series: green LED blinks 5 times, pause, repeat
The chain or belt is too tight, or the control system has a fault.
Applies to: ChainLift 600 (1022), ReliaG 600 (1024), BeltLift 600 (1042), ChainLift 800 (2022), ReliaG 800 (2024), ChainLift 700 (2027), QuietLift 800 (2042). What you see: the status LED on the motor unit, green 5 flashes, repeating.
What Genie says to do
- Genie says to adjust the chain or belt tension as section 1 of the owner’s manual shows, and otherwise to contact Genie customer service for technical support.
Genie’s safety line: “If you suspect a problem with the garage door hardware or springs, contact an authorized Genie dealer or a trained door technician.”
No repair advice of our own. The steps above are only Genie’s, as its page states them; semiatic gives no repair instructions of its own. For anything beyond them, Genie’s page and a trained door technician are the authority.
Source
Genie’s own help page, read on the date shown.
- The Genie Company: Genie Garage Door Opener Troubleshooting Guide- for models 1022, 1024, 1042, 2022, 2024, 2042, 2027 — ChainLift 600 (1022), ReliaG 600 (1024), BeltLift 600 (1042), ChainLift 800 (2022), ReliaG 800 (2024), ChainLift 700 (2027), QuietLift 800 (2042). store.geniecompany.com Checked 2026-09-29.
The same count on other openers
The same number of flashes on another maker’s opener means something else.
Other Genie codes
Find a code by which light flashes and how many times, on any maker’s opener →