semiatic
M

M in a hexagon: CHAdeMO DC, 50–500 V

DC charging through configuration AA, the CHAdeMO connector, in the 50 V to 500 V range: vehicle connector and vehicle inlet.

What to do

Match the letter: M and N are the same connector configuration for different voltage ranges. If the charger's letter differs from your car's, check your vehicle's manual.

What it looks like
A capital M inside a horizontal hexagon, white or silver on black.
Where you find it
By the DC charging inlet of a vehicle that has this connector; on the connector of a DC charger's cable; in the owner's manual.
Kind
electric-vehicle charging identifier
Set by
EN 17186:2019, identifiers for the electrical interface (a hexagon), required by Directive 2014/94/EU Article 7; letter as given in the annex table of the ACEA/ChargeUp Europe/CharIN/Eurelectric guides

Can my car charge from it?

“Consumers will only need to match the label of their vehicle with the corresponding label on the charging station.”

“The European legislation requires the labels only for the new vehicles placed on the market for the first time or registered as of 20 March 2021.”

Check your vehicle's manual or the label inside the filler flap (on an electric car, the label by the charging inlet). We do not say which makes or models take this connector.

Official guidance:

In detail

  • The annex table: configuration AA, vehicle connector and vehicle inlet, 50 V to 500 V, identifier M; the same configuration from 200 V to 920 V is N.
  • The CHAdeMO Association's overview of IEC 62196-3 names Configuration AA as 'CHAdeMO (Japan)'.

What it does not mean

M is not a Combo 2 label: K and L name configuration FF, M and N name configuration AA, a different connector.

Labels that go with it

Sources

Each document was fetched and read on the date shown; the clause or section is the one that sets or explains this label.