semiatic

Hush or silence mode · Aico · smoke

Aico: Silent, red light flashing every 8 to 10 seconds

Hushed after a false alarm: the Ei650 is silenced for about 10 minutes at reduced sensitivity. The leaflet’s text says the red light flashes every 10 seconds; its indicator table says every 8 seconds.

What you see
One red flash about every 8 seconds
What you hear
Silent

If it is sounding a full alarm instead: the maker’s emergency instruction

Smoke alarm

Aico: if the alarms are sounding there may be a fire — evacuate, and if in doubt always assume the fire is real (homeowner FAQ). The Ei650 leaflet: check doors for heat before opening, crawl low under heavy smoke, get out and meet at your prearranged place, call the Fire Brigade from a neighbour’s house or a mobile phone giving your name and address, and never re-enter a burning house.

From Homeowner FAQs — Why is my alarm beeping? and Battery Powered Smoke Alarms Ei650 Series — instruction leaflet (Rev 6).

Carbon monoxide alarm

Aico: a sounding CO alarm means carbon monoxide is likely to be present. Turn off any gas appliances, open windows and doors, and leave the property; ring the emergency number of your gas or fuel supplier; do not go back in until the alarm has stopped.

From Homeowner FAQs — Why is my alarm beeping? and Basic Alarm Fault Finding.

What Aico says to do about this signal

  1. It returns to normal sensitivity by itself after the 10 minutes. Press Test/Hush again if you need more time.
  2. Frequent cooking false alarms, Aico says, mean the alarm may be in the wrong place or the wrong type — a heat alarm suits a kitchen.

From Battery Powered Smoke Alarms Ei650 Series — instruction leaflet (Rev 6). If your alarm’s pattern is not exactly this, check the manual for your model: Aico models do not all use the same signals.

Other Aico signals

Hush or silence mode on other brands

The same state sounds and looks different on each make — which is why a chirp pattern cannot be read without the brand.

Sources

Every line on this page comes from Aico’s own documents, read on the date shown. Nothing is taken from third-party code sites or other makes.